- Joined
- Dec 20, 2011
- Messages
- 3,448
Hi, maybe you made a typo since 107 is larger than 106, 105 being too lean seems more likely! (or 107 being too rich?)
106 seems most likely choice anyway.
Amal MK2 Single Carb on a 850 need specs
- Thread starter MS850
- Start date
- Status
Hi, maybe you made a typo since 107 is larger than 106, 105 being too lean seems more likely! (or 107 being too rich?)
106 seems most likely choice anyway.
- Joined
- Aug 14, 2017
- Messages
- 105
Yes, Steve. Strange; by opening the Chocke a bit the Motor was running better.
This gave me the assumption that it was too lean.
But you are right, it means in total it was too lean, not only dedicated to the Needle jet
bad setup:
107 Needle Jet / 280 Main Jet / Air jet 15 / 3 Side / Old Needle 2A1 / needle position 2 grooves -->Motor POPS does not run propper, by open a bit the Choke the Motor works better, but not satisfied!
My Setup:
106 NeedleJet / 300 Main Jet /Air Jet 20 / 3.5 Slide, NEW Needle 2A1/ needle position 2 grooves from the tip (longest part of Needle),
Since this time a
at my face- Status
