Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
Power unit in place with new isolastic gaiters front & rear. Ooh my aching back!For some reason, I removed the bottom case bolt when the lump was sitting on the floor. Had to pull the front iso bolt, lift the engine with a tie-down strap wrapped over the frame and hooked in the exhaust ports, replace the bolt, then re-install the front is bolt. 20 minutes of extra work.Primary in place, all properly shimmed out. Also added an extra friction plate to optimize stack height. Sure enough, clutch pull is MUCH lighter.
Power unit in place with new isolastic gaiters front & rear. Ooh my aching back!
For some reason, I removed the bottom case bolt when the lump was sitting on the floor. Had to pull the front iso bolt, lift the engine with a tie-down strap wrapped over the frame and hooked in the exhaust ports, replace the bolt, then re-install the front is bolt. 20 minutes of extra work.
Primary in place, all properly shimmed out. Also added an extra friction plate to optimize stack height. Sure enough, clutch pull is MUCH lighter.
