72 Commando Wheel Bearing

Status
Not open for further replies.

SFC Diesel

Joined
Dec 21, 2011
Messages
2
Does anyone know of a sealed bearing replacement for the double roller bearings in the front and rear.

the measurements are 17x40x16 mm, I found a single row sealed bearing for the other three, but nothing for the double rows, except one that require machining the hubs and spacers.

Thanks.
 
yes - i don't know the actually part /bearing number (sure someone will) but any Norton/brit shop will carry them (Just got a set from Phil at fairspares a few weeks ago)
m
 
Walridge, 06-7688S $49.95, no machining. Make sure it's the right one though. It worked fine in my '69, both front and rear. Phil at FairSpares 06-7688 has them too for $35, but don't know if they're sealed.

Dave
69S
 
DogT said:
Walridge, 06-7688S $49.95, no machining. Make sure it's the right one though. It worked fine in my '69, both front and rear. Phil at FairSpares 06-7688 has them too for $35, but don't know if they're sealed.

Dave
69S
Click to expand...

- the ones i got from him were sealed.............. but i think the S at the end of the # denotes sealed
 
Just to be clear.
Make sure you check that the sealed bearing you get is 17x40x16 and not 17x40x17.5 like most sealed bearing of this size can be. It is common to get this bearing and have to machine the dummy axel .056 to allow for clearance. If you can get the sealed bearing 17x40x16, which you can, you will not have to machine the dummy as DogT mantioned.
 
Status
Not open for further replies.
Back
Top