Hi everyone. I have been out for a ride tonight on my bike. It not been used for a few weeks. It turned over for a bit before starting and but when running the engine management light stays on. The bike rode fine no loss of power or anything strange and everything seemed to work fine. At one point I pushed the high beam button and the EML went off (May have been a coincidence). Then later I stalled the bike and the EML came back on and would not go off even flicking the high beam. The Bike only done about 2,500 miles and has been decated and has short cans. I had a few issues (I think I am beginning to feel this is the norm if you have a 961) and changed all the Relays to sort starting issue I had and since then been running fine Any ideas please.