- Joined
- May 28, 2003
- Messages
- 2,590
My project will be a process done to my 63 Atlas rolling chassis. As shown The 18 rear wheel has been changed to 19 and the front brake has been changed to TLS commando. Partially styled as a 62 88SS with small tank and early style MCH61 headlight. Headlight will have speedo, oil pressure gauge, ampmeter and light switch. Rebuilt gearbox has commando shaft to accommodate a belt drive. Tail light will remain stock as the later 63+ style , to match the original fender.
I plan to rotate 3 engines through this frame for testing. Finally in a few years it will revert to the original matching # engine after a rebuild.
First is the 1959 88 done up partially as an 1962 SS.
Second will be my newly acquired 650SS. I extracted this engine almost 15 years ago from a commando as part of a club project for a member. It was sold off to another member. I recently acquired it from him.
Third will be my combat/atlas hot rod engine.
I plan to rotate 3 engines through this frame for testing. Finally in a few years it will revert to the original matching # engine after a rebuild.
First is the 1959 88 done up partially as an 1962 SS.
Second will be my newly acquired 650SS. I extracted this engine almost 15 years ago from a commando as part of a club project for a member. It was sold off to another member. I recently acquired it from him.
Third will be my combat/atlas hot rod engine.