Early P11 in bits from the US. Frame arrived already powder coated, so dismayed at my own stupidity to notice , after fitting engine , gearbox and front forks that those small but significant silencer brackets were absent!
I know of no other P11 owners in my neck of the woods , so no reference as to positioning of these brackets which I imagine is critical if you want the pipes in the right place , avoiding primary casing , side panel etc.
Can any body please give me an accurate measurement between the rear shock top bolt centre and the bolt hole centre in the silencer bracket?
I have one measurement supplied by Anthony Curzon which is : 8 5/32" or around 207.6 mm, I would like that verified before I go mad with the sif welding.
Many thanks in advance!
I know of no other P11 owners in my neck of the woods , so no reference as to positioning of these brackets which I imagine is critical if you want the pipes in the right place , avoiding primary casing , side panel etc.
Can any body please give me an accurate measurement between the rear shock top bolt centre and the bolt hole centre in the silencer bracket?
I have one measurement supplied by Anthony Curzon which is : 8 5/32" or around 207.6 mm, I would like that verified before I go mad with the sif welding.
Many thanks in advance!
