Kick in pants in direction of finding correct BENDIX paxilon contact breaker assembly parts numbers .
http://www.billymegawatt.com/uploads/6/ ... racing.pdf
IF you USE the NYLON ONES :shock: Clean the cam maticulously & polish , lightly grease then remove near all with good tissue .
A toothpich to apply grease to contact heel , when clear .
Run then clean. BUT , there should be just a wave , a 1/2 mm in dia of grease , before heel on cam .
you can run the points in like this . IF they get dry the plastic MELTS , the gap closes , the IGNITION ADVANCES , and pop , whizz , a piston melts .
most will run Elec. Ign. maybe a Pazon has the right advance curve .
And as for those coils , thow in a Ignition Loom . NEW . Mains Power . If the coils wont spark HALF AN INCH . Throw them at someone whos really annoying .