- Joined
- Aug 8, 2005
- Messages
- 2,720
I was getting around to working on my PR front wheel. I took the old oxidized spokes off and cleaned the hub all nice and shiny. 
I recorded the offset on both sides but it is negligible.
I finally recieved my 2.5" Morad rim from Walridge Motors in November so I stuck it on along with new spokes.
I just loose tightened to the end of the threads on the spokes so I will put it on my wheel truing rig and try and get it reasonably straight. Let me know if I got the spokes right.
I am asking those who have a PR.
Cheers,
Thomas
I recorded the offset on both sides but it is negligible.
I finally recieved my 2.5" Morad rim from Walridge Motors in November so I stuck it on along with new spokes.
I just loose tightened to the end of the threads on the spokes so I will put it on my wheel truing rig and try and get it reasonably straight. Let me know if I got the spokes right.
I am asking those who have a PR.
Cheers,
Thomas