Shelby-Right
VIP MEMBER
- Joined
- Jan 28, 2022
- Messages
- 650
![New-Zealand Country flag](https://www.accessnorton.com/images/flags/shiny/32/New-Zealand.png)
I noticed the finish on the small plunger in cover , anti drain back valve , not that great , and read that they can stick , gave it light polish with 600 in the lathe , much smoother , also the support shaft that goes into the cover had .002" clearance but was causing issues it want to bite into the alloy , I had to diamond file and polish the champher , no problems after that slid on nice .