- Joined
- Nov 20, 2004
- Messages
- 20,280
Re: Last train to Glasgow Central..........Last Traaaain....
If you get the stubs hot enough (red hot) the braze should become molten once again so you can remove the bolts.
Brush/scrape it off (with a wire brush/scraper) while still in its molten state.
auldblue said:I have tried to find info on the net but it is patchy. My plan is to bolt the head on and then remove the stubs. Will heating up the bolts soften the braze enough to tap out the studs with a twist and not deform the surface to seal the carbs?
If you get the stubs hot enough (red hot) the braze should become molten once again so you can remove the bolts.
auldblue said:Do I need flux on it to avoid the braze sticking?
Brush/scrape it off (with a wire brush/scraper) while still in its molten state.