fork slider fasteners ???????

how do ! I'm putting together the forks of my 11a and don't have a clue which fasteners go where ? there are studs and bolts but I'm not sure what goes where , i believe I've had the info but can't locate it !!
anyone help please ?
thanks in advance

andy

having thought about this a bit more , theres 2 studs , 2 bolts and 4 bolts .so the four bolts would hold the stays onto the sliders that leaves 2 bolts and 2 studs so where do these go ?

Their are four 5/16 studs that go to the bottom of the sliders for the axle "caps", similar to a Triumph. Their should be four 1/4
inch studs for the central stay, and then you have two bolts to capture the damper tubes, recessed at the bottom.

Mike B.

thanks for the reply mike