APRRSV
VIP MEMBER
- Joined
- Jun 26, 2016
- Messages
- 590
I have a primary cover that I would like to use in an Atlas project. My question concerns the primary chain inspection cover retainer that pivots off and on the inspection cover. Specifically, I would like to know how it is mounted to the primary cover. The cover I have has the retainer mounted to the cover with what looks like a rivet on the forward side but on the rear side there is a boss with a hole that penetrates all the way through to the inside. Is this rear fastening point originally another rivet?
Thanks,
Ed
Thanks,
Ed