961 fuel Tank Bolts

Gojuu said:
I recall they addrssed it with a different top yoke?
Click to expand...
Yep, different top yoke that didn’t foul the tank when removing it - the tank that is. Wonder if they ever backtracked and retrofitted the bikes already sold?

Don’t think they ever addressed the lack of bobbin mounting holes though. That never really made sense - we established that there was room I think.
 
Picked these up today from a local fastener shop. Gonna try this if I lose my current setup. Should allow fastening without clamping the mat. Not sure movement of the mat is too important though - certainly the way mine is set-up.

If this is a fail I’ll try the same but with the purple Loctite.

Just realised that I’ll have the TAB tank arriving soon so may be wasting my time really!:rolleyes:

IMG_1335.jpegIMG_1336.jpeg
 
Last edited:
I know there's a lot fixed on the TVS 961 particularly in the engine but I am feeling there are a number of little things on my Donington 961 which was better..... Especially the bits I have now fixed......

Ps can we call Donington Dominators 'Donny Dommies'?
 
Man. Barely more than finger tight is too much. I'm sure a mechanic spun mine but whatever. It was held on like crap as a few of us know.
Now that I have the Tabll, I'll have it repaired.
 
TonyA said:
Hi Stu , Whatever Norton are using now should work for our bikes , correct ?
Click to expand...
Hi Tony,
I received the new splash matt from Norton(mine in the photo is cut off at the sides), the material is totally different, it’s more like rubber silicon. It is exactly like what we have but they don’t use the upper part. Also they don’t supply it with the Velcro scotch, it needs to buy separately and that would be the 3M heavy duty Velcro.
I didn’t install it yet. See photo below.

I replaced the tank bolts with these M6 x 1.00 x 12mm and it’s perfect.

Just found this amazing item on AliExpress. Check it out! US $2.63 25％ Off | Wanyifa Titanium Ti Bolt M6x12 15 20 25 30 35mm Allen Key Head Screw for Bicycle Motorcycle Brake
 

Attachments

  • 961 fuel Tank Bolts
    IMG_8848.jpeg
    424.7 KB · Views: 52
Last edited:
I hate these splash mats so much. The cables above just flop it down and the whole thing rests on the top of the rocker cover. I removed mine and replaced the tank bolts with studs/nuts which help locate it through the battery/coil/relay carrier and have a tufnol plate located by these studs/nuts underneath keeping the cables in place. I plan to form an aluminium plate with a piece of silicon sheet at the front when I get the chance.
 
Clive said:
I hate these splash mats so much. The cables above just flop it down and the whole thing rests on the top of the rocker cover. I removed mine and replaced the tank bolts with studs/nuts which help locate it through the battery/coil/relay carrier and have a tufnol plate located by these studs/nuts underneath keeping the cables in place. I plan to form an aluminium plate with a piece of silicon sheet at the front when I get the chance.
Click to expand...
Yes I hate this splash mats so much too!
You can order a 2mm Carbon Fiber sheet on AliExpress, much better than aluminum and it’s cheap.

You can order from them cut to size.
I ordered a few and their carbon is TOP TOP TOP.

Just found this amazing item on AliExpress. Check it out! US $1.00 | Customized Carbon Fiber CNC Cutting Plate Service DIY Carbon Fiber Sheet Plate CNC Machining Precision carving
 
You must log in or register to reply here.
Back
Top