ntst8
VIP MEMBER
Valve guides are cast iron, no appreciable wear on them or the valve stems.
Rocker bushes - these were easily removed, and i am told could be reinserted with hand pressure . Must have been very close to the rockers turning on the bushes rather than the bushes turning on the spindles. Ollie is making new ones this week.
Throttle body - idle air intake plugged and ready to go.
Rocker bushes - these were easily removed, and i am told could be reinserted with hand pressure . Must have been very close to the rockers turning on the bushes rather than the bushes turning on the spindles. Ollie is making new ones this week.
Throttle body - idle air intake plugged and ready to go.
Last edited: