2010 Norton Commando 961 billet clutch

Garnett1957

Joined
Jun 1, 2023
Messages
6
Country flag
Just a inquiry to anyone who has a set of the original spacer bolts that screw into the clutch back plate, as I would be interested if they where for sale. I have installed some off eBay but they are slightly shorter in length.
Cheers
Rob
 
Hi Rob, what length do you need? I think you had purchased 35mm versions right?
 
Yeh
cliffa said:
Hi Rob, what length do you need? I think you had purchased 35mm versions right?
Click to expand...
35mm. But the originals are a couple of mm longer plus the threaded male length is shorter and the female inner is also shorter. Just worried the might unscrew ??
 
Hi Rob, why don’t you order some longer ones (they are available from the same supplier) then take them to a machine shop and get them to adjust them to suit. Alternatively just get them to make you a set from scratch.


EDIT:

If I were in the U.K. I would gladly alter some for you, but there must be some folks on here with a lathe and a tap & die set who could do them for you.
 
Last edited:
cliffa said:
Hi Rob, why don’t you order some longer ones (they are available from the same supplier) then take them to a machine shop and get them to adjust them to suit. Alternatively just get them to make you a set from scratch.


EDIT:

If I were in the U.K. I would gladly alter some for you, but there must be some folks on here with a lathe and a tap & die set who could do them for you.
Click to expand...
I will have a look for a local m/c shop and see if they can fabricate new bolts, or like you say get some longer ones an get machined to size
Cheers for the responses
 
You must log in or register to reply here.
Back
Top