If THAT is "dirty", I'm in TROUBLE!Ok, here's a few from today's ride.
I seen a set up using a new type battery charger and what they did to make it keep charging was use a Flat-Dead battery , so then the charger get's tricked to believe it still needs charging .. The job was for an old MGA car parts , looked to work well ..I've done three tanks this way. It is slow but it works. But the old dodge of using a battery charger as a power source is getting harder because modern ones don't seem to work and the old ones burn out it after a few days.
And in general, take copious amounts of pix from all angles before you get too far. Most useful at reassembly time.