- Joined
- Oct 28, 2014
- Messages
- 1,902
FIRST...the clutch...fiber plate goes in first and sits against the bottom of the clutch basket? The existing plates show that but the book is telling me the opposite.
2ND.....the stator studs have an odd taper..they start out at 5/16 but taper down to 1/4. Is there a special nut for this? The holes in the Stator are 5/16 and will locate on the stud for maybe 1/3 of its depth. Why all the extra space and the taper?
2ND.....the stator studs have an odd taper..they start out at 5/16 but taper down to 1/4. Is there a special nut for this? The holes in the Stator are 5/16 and will locate on the stud for maybe 1/3 of its depth. Why all the extra space and the taper?