- Joined
- Apr 6, 2013
- Messages
- 1,405
Anyone experience the same pushrod interference issues?
When reassembled, I will definitely turn the motor over, fingers on the rockers to test for interference.
I got 40 minutes into the teardown and 2+ hours in cleaning the sealer off the cases/barrel.
Previous mechanic used threebond/yamabond type sealer on the base gasket. Not a good idea. A pain to clean between the studs and not get sealer/gasket particles into the case. Used the rear nuts to separate the barrel from the case.
When reassembled, I will definitely turn the motor over, fingers on the rockers to test for interference.
I got 40 minutes into the teardown and 2+ hours in cleaning the sealer off the cases/barrel.
Previous mechanic used threebond/yamabond type sealer on the base gasket. Not a good idea. A pain to clean between the studs and not get sealer/gasket particles into the case. Used the rear nuts to separate the barrel from the case.