Hey Grandpaul!

Status
Not open for further replies.

Chester

Joined
Mar 28, 2010
Messages
92
Do you mean to push the spacer tube enough to the side to fit a small drift down there?
I thought the spacer tube would act as the drift to knock out the bearing , using a large drift at the top, so as not to damage the tube too much.
 
Chester said:
Do you mean to push the spacer tube enough to the side to fit a small drift down there?
I thought the spacer tube would act as the drift to knock out the bearing , using a large drift at the top, so as not to damage the tube too much.
Click to expand...

If you can, push the spacer tube to the side and slide the drift down to the bearing and beat the crap out of it. Bearing and spacer tube will eventually come out.
 
Thanks swooshdave. Guess I was being a touch too timid.
Going to try that now.
 
hi chester,dont beat the shit out of it all on one side,move the spacer around and hit it on the other side as well
 
Did all those and it worked.
Thanks guys!
Just had to take the beating to another level.

Those bearings look sealed. I guess they are not servicable?
 
Chester said:
Did all those and it worked.
Thanks guys!
Just had to take the beating to another level.

Those bearings look sealed. I guess they are not servicable?
Click to expand...

Not after the beating they just took!
 
Status
Not open for further replies.
Back
Top