- Joined
- Feb 10, 2015
- Messages
- 62
Putting together a MkII 850 engine,( so no rotary disk and spring on the end of the cam) and I am finding way too much end play on the cam.
The Cam thrust washer is in place and with the Camshaft sprocket bolted on I have 32 thousands end play.
Can't find a spec in the workshop manual for this endplay on the Cam.
Is it possible to shim the back of the Camshaft sprocket?
Thanks,...
The Cam thrust washer is in place and with the Camshaft sprocket bolted on I have 32 thousands end play.
Can't find a spec in the workshop manual for this endplay on the Cam.
Is it possible to shim the back of the Camshaft sprocket?
Thanks,...