961 Countershaft sprockets

cNw

VIP MEMBER
Joined
Apr 16, 2009
Messages
485
Country flag
Hey Guys,

Wanted to give you a heads up that I still have a few 961 countershaft sprockets available. 4 each of the 17 tooth and 4 each of the 19 tooth.

Once these are gone, there will not be another production run, so this is it.


Thanks,

Matt

PS. If ordering from Australia, get a hold of me directly at the shop as AU still have a shipping block in place and I can only ship Express service and this is not available as an option when placing an order on line. In other words, it wont allow you to complete the order.

nortonworks@fone.net
 
Hey Guys,

Wanted to give you a heads up that I still have a few 961 countershaft sprockets available. 4 each of the 17 tooth and 4 each of the 19 tooth.

Once these are gone, there will not be another production run, so this is it.


Thanks,

Matt

PS. If ordering from Australia, get a hold of me directly at the shop as AU still have a shipping block in place and I can only ship Express service and this is not available as an option when placing an order on line. In other words, it wont allow you to complete the order.

nortonworks@fone.net
Can you refresh my memory, what is the stock tooth count?
 
Hey Guys,

Wanted to give you a heads up that I still have a few 961 countershaft sprockets available. 4 each of the 17 tooth and 4 each of the 19 tooth.

Once these are gone, there will not be another production run, so this is it.


Thanks,

Matt

PS. If ordering from Australia, get a hold of me directly at the shop as AU still have a shipping block in place and I can only ship Express service and this is not available as an option when placing an order on line. In other words, it wont allow you to complete the order.

nortonworks@fone.net
Thanks Matt,

E-mail in your inbox confirming purchase for a 17t to Australia.

Regards

Steve
 
Confirming same, have sent an email for both 19t and 17t.
 
That’s called covering all of the bases Gj!! Most expensive sprockets in motorcycling history - but a cheap way of improving performance! :D
It's less expensive than it will be if I can't get one!

I'll admit, I've built a fair supply of spares in 6 months......
 
Thanks for the orders guys

Update on inventory. One 17 tooth and one 19 tooth left

Yes, they are expensive and this due to the very small run in the CNC. Still had to get a program created and do the set up. I we were making 1000 of them, they would be less than half the price. Wouldn't want to get stuck with that inventory though.

Matt
 
Thanks for the orders guys

Update on inventory. One 17 tooth and one 19 tooth left

Yes, they are expensive and this due to the very small run in the CNC. Still had to get a program created and do the set up. I we were making 1000 of them, they would be less than half the price. Wouldn't want to get stuck with that inventory though.

Matt
Fully understand the low volume manufacturing cost of these items Matt, it’s the shipping block to Aus that is a little difficult to fathom.

Looking forward to seeing what the 17t does for the Norton.

Thanks for the support.
 
Thanks for the orders guys

Update on inventory. One 17 tooth and one 19 tooth left

Yes, they are expensive and this due to the very small run in the CNC. Still had to get a program created and do the set up. I we were making 1000 of them, they would be less than half the price. Wouldn't want to get stuck with that inventory though.

Matt
Hi Matt , Look at how long it took to sell the 10 or 20 that were made !
 
Back
Top