POWER ARC ELECTRONIC IGNITION....

Status
Not open for further replies.
britbike220 said:
Pre programmed for street use at old britt's is 343.56 including future programming for free is no where near the price you speak of jean. For most pre programmed would be ok for street use. I imagine if you want the whole kit and race it is as you say, but how often would most people need to reprogram it? If Fred says he has dyno'd it and is offering good maps I'd be ok with that.

http://www.oldbritts.com/ob_start.html
Click to expand...

:oops: I was going by the prices on their site, not Old Brits. $343.56 is more like it, especially if it has been reprogrammed for the Norton.

Jean
 
Boyer so sluggish response on Nortons, racers like Jim Schimdt would put resister between the trigger leads to half short them out to get better advance to blast out of turns. I was tickled to feel the points response on Trixie after getting used to Boyer analog on Peel.

I've had long talks with PowerArc, forget the fella's name off hand but I can tell ya Fred ain't making that much on em by his retail price. Wish I'd known he was a dealer as likely better support than factory direct.
 
KSUWildcatFan said:
I'd agree with $360. That's a solid price if it's as good as it sounds!

-Jordan
Click to expand...

Actually the $343.56 is the complete kit.

The ignition alone is only:

Power Arc ignition only, part number 51-150101, $220.00

If you already have the right coil you should be good to go. I don't know if the Power Arc is compatible with the Dyna coil. I would hope so.
 
We have not tried the Power Arc with a Dyna coil. According to Power Arc, the Dyna coil will work, but you will only get one spark per compression stroke. The Dyna coil will not charge up fast enough.

Fred Eaton, Old Britts
 
Status
Not open for further replies.
Back
Top