Wot crank/ rotor nut for Maney crank?

Status
Not open for further replies.
Fast Eddie

Fast Eddie

VIP MEMBER
Joined
Oct 4, 2013
Messages
20,640
Country flag
As the title suggest...

Two rotor nuts I have ‘in stock’ that fit my ‘74 won’t go on the Maney crank.

Is it different?
 
Fast Eddie said:
As the title suggest...

Two rotor nuts I have ‘in stock’ that fit my ‘74 won’t go on the Maney crank.

Is it different?
Click to expand...

I'm using standard rotor nuts on two Maney cranks at the moment. They fit fine.

Ken
 
freefly103 said:
Happened to me. Are yours AN?
Click to expand...

No, one is original I think and the other is a Norvil extended thingy.

I’ve got the degree disc on there with a normal nut out of my old nut n bolt box, so I’ll have to revisit this when I’ve finished degree-discing.
 
Fast Eddie said:
No, one is original I think and the other is a Norvil extended thingy.

I’ve got the degree disc on there with a normal nut out of my old nut n bolt box, so I’ll have to revisit this when I’ve finished degree-discing.
Click to expand...

For your degree disc...a clutch nut works fine!

I have secured a crank pulley/spacer with a clutch nut and loctite! But currently have a standard AN nut shortened to be able to butt up tight on the pulley and spacer.

I do recall the thread being tight with some nuts of supposedly the same thread! But I have had that issue on the worm LH thread as well!
 
Last edited:
The thread is the same, it’s just rather tight, and I was being a wuss...
 
Status
Not open for further replies.
Back
Top