Who stocks 1-15/16" 14tpi taps?

Status
Not open for further replies.
A

Alpenglo

Joined
Jan 19, 2015
Messages
9
Hello,
Where can I obtain a 1-15/16" 14tpi tap (Commando exhaust ports)?
I've tried Drills and Cutters and Victor Machinery, they tried their suppliers, also, but no luck.

Thank-you,
Peter
 
Thank-you, Maylar, I'll give Mutual Screw a call in the morning. Their website shows the tap at $197.33

Thank-you, Andy. I found that link as well and already tried Drills and Cutters. They no longer can get this tap from their supplier, nor could Victor Machinery. I suspect they both utilize the same suppliers.

Thank-you, L.A.B., Dewitt and Global Aircraft are the at the same price, $238. Interesting about Global's website is that in the upper LH corner it has an image that says "Company Logo" like the website hasn't quite been developed yet! So not sure about that company. Has anyone dealt with Global Aircraft before?
I'll try those two in the morning, also.

I found another site called HandsOnTools.com that is the least expensive at $151.49.

Drill America quotes $340 on their website.

All the above seem to reference the same part #, DWTST1-15/16-14B. But none of them indicate whether they have stock.
So I wondered if it might be better to try the UK since the Norton exhaust port is a direct application for this tool?

Qualtech is named as a manufacturer on some sites. I haven't been able to locate that company yet to see if they still make the tap (or if they still exist). Sometimes you can go to the manufacturer to get a list of companies that have ordered a particular item.

Also if anyone knows of an available used one, I would be interested.

Thank-you,
Peter
 
Status
Not open for further replies.
Back
Top