1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

tail light/Number Plate Bracket MK II Commando

Discussion in 'Wanted' started by Tornado, Jul 6, 2018.

  1. Tornado

    Tornado VIP MEMBER

    Joined:
    Dec 5, 2017
    The tail light/number plate bracket that came with my '74 850 Mark II has seen better days, twisted, distorted and trick to bend right again.
    If you have one collecting dust, I'd be keen to relieve you of the burden...
    Cheers.
     
    Tags:
  2. gortnipper

    gortnipper VIP MEMBER

    Joined:
    Nov 11, 2013
    I have one from my 74 that one of the turn signal mounting tabs has broken half off. Could tack on a washer or if you don't use indicators, all good.
     
  3. Tornado

    Tornado VIP MEMBER

    Joined:
    Dec 5, 2017
    Could you provide a picture showing the broken part? I don't have a welder but am pretty handy with epoxy/fiberglass work.
    Thx.
    Mike.
     
  4. batrider

    batrider

    Joined:
    Aug 9, 2008
    Colorado Norton Works has a nice license plate holder which replaces the metal part of the tail lamp. You can use the remains of your fiberglass part with it. It's much stronger than the stock one which I had welded once before I decided it was a goner.
     
  5. gortnipper

    gortnipper VIP MEMBER

    Joined:
    Nov 11, 2013
  6. Tornado

    Tornado VIP MEMBER

    Joined:
    Dec 5, 2017
    Thx for the pic...looks workable for a repair. What do you want for it?
    Mike.
     

Share This Page

Loading...