Fast Eddie
VIP MEMBER
- Joined
- Oct 4, 2013
- Messages
- 21,592
Does anyone know where one might be able to purchase a T140 (5 speed) gearbox mainshaft with Norton splines on the clutch end?
T140 mainshaft with Norton splines
- Thread starter Fast Eddie
- Start date
baz
VIP MEMBER
- Joined
- May 26, 2010
- Messages
- 7,901
I don't know where you'd go for one now Dave Nourish has passed
I was showing my mate the pre unit box I have with t140 5 speed and Norton spline
He said he'd bought the last shaft from Dave
The gearbox I have was built by Phil Pick at triple cycles
Maybe try there ,see if they have any old stock
Chris
VIP MEMBER
- Joined
- Jan 21, 2008
- Messages
- 1,703
Hi Eddie
Good luck with getting hold of Phil Pick, well you know that. Phil Biggadyke made my last one, he did work for Dave. It might be worth asking Andy if he has any intention of doing them. Completely of the grid, John Simms ran a Commando clutch on his Norths. Ive seen photos, you would need to bore it for the clutch rod.
Good luck with getting hold of Phil Pick, well you know that. Phil Biggadyke made my last one, he did work for Dave. It might be worth asking Andy if he has any intention of doing them. Completely of the grid, John Simms ran a Commando clutch on his Norths. Ive seen photos, you would need to bore it for the clutch rod.