swing arm shaft / Heinz Kegler

Hi, can anyone please tell me where I can purchase a Heinz Kegler swing arm shaft collar or similar, David

Thanks for the rapid replies lads, awesome!! David

Depending where you are I think Holland Norton works do them.

Re my last, Holland Norton Works:Kegler swing arm spindle modification #H17

Lateral forces exerted on the swing arm spindle will cause space for motion on the spindle and the (pre-MK3)engine cradle spindle tube, allowing the spindle and swing arm to rock. This creates a loose rear end which can be felt by grabbing the rear wheel and pushing and pulling it side to side. As the space for motion increases the roadholding will get worse.
The Kegler modification (set of 2 heavy-duty steel clamps) eliminates the rocking motion and supports the spindle to prevent motion. The modification comes with installation instructions (clamps can be fitted without removing the swing arm).

Prijs: €42 including VAT

i also do them in steel. i will also send them outside the us BUT the post can be very expensive.