1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Stormer clutch

Discussion in 'AJS & Matchless' started by J. M. Leadbeater, Nov 2, 2015.

  1. J. M. Leadbeater

    J. M. Leadbeater

    Joined:
    Apr 21, 2015
    Is there anyone out there with an AJS Stormer who can tell me ....
    1. The outside diameter and thickness of the diaphragm spring.
    2. the diameter of the raised lip(pressure line) on the pressure plate.
    Curiousity has I fear once again got the better of me .......
     
    Tags:
  2. L.A.B.

    L.A.B. Moderator VIP MEMBER

    Joined:
    Nov 20, 2004
  3. SteveA

    SteveA VIP MEMBER

    Joined:
    Dec 20, 2011
  4. lcrken

    lcrken VIP MEMBER

    Joined:
    Mar 15, 2009
    In the two Norman White belt drive Commando clutches I have using the AJS bits, the diameter of the spring is 5.24", and the thickness is .074". The diameter of the raised area on the pressure plate is 4.162" on one pressure plate and 4.650" on the other. The 4.162" one looks like the original, with a narrow raised ring at the top of tapered areas on the inner and outer edges of the plate. The 4.650" one looks like it started out like the other one, but has been machined down on the top, and instead of a raised pressure ring, the top is flat out to where it starts to taper down at the edge.

    Ken
     
  5. Von Dutch

    Von Dutch

    Joined:
    Nov 20, 2015
    I'm new here but since this relates to the AJS Stormer clutch I am trying to rebuild a early 1969 250.
    I am having trouble getting the center nut off that holds the cable pull onto the center the clutch.
    Any tips? Barely any room and I can't get a socket on it. Thanks for any reply.
    Mark
     
Loading...