Starting procedure

Fast Eddie

VIP MEMBER
Joined
Oct 4, 2013
Messages
21,797
Country flag
Ok folks,

Is there a definitive starting procedure for Brum 961s ?

Specifically, do we give ‘em a twist of the throttle or not?

There have been various conversations about not touching the twist grip during startup cos it’ll confuse the TPS etc in the past. And wondered if this was actually settled by now ?
 
Ok folks,

Is there a definitive starting procedure for Brum 961s ?

Specifically, do we give ‘em a twist of the throttle or not?

There have been various conversations about not touching the twist grip during startup cos it’ll confuse the TPS etc in the past. And wondered if this was actually settled by now ?
Have you tickled the carbs and picked a safe landing area !!
 
You can play around with the throttle until the sun goes down....won't have any effect on the ecu's tps settings. By rights you should be able to just pull the clutch lever in and press the start button....the ecu should do the rest via the iacv.
 
Back
Top