L Lorenzo FULL MEMBER Joined Mar 2011 Messages 434 Apr 4, 2011 #1 anyone knows where to buy a pair of polished stainless steel Fork Stanchion Top Nuts? thank you for helping!
anyone knows where to buy a pair of polished stainless steel Fork Stanchion Top Nuts? thank you for helping!
DaveK MEMBER Joined Aug 2009 Messages 128 Apr 4, 2011 #2 I know Oldbritts.com sells Stainless top nuts, (13-060345/SS) not sure if they are polished.
P pelican FULL MEMBER Joined May 2009 Messages 1,390 Apr 5, 2011 #3 cnw - they are flawless and heavy
B BrianK MEMBER Joined Jun 2007 Messages 1,857 Apr 5, 2011 #4 I believe Rocky Point Cycle, owned by our own RoadScholar, could supply those also.
CanukNortonNut MEMBER Joined Aug 2005 Messages 2,988 Apr 5, 2011 #5 Lorenzo You could try WalridgeMotors. They have them in SS as well as Aluminum. I bought a set from Mike and they were nice. Regards, CNN
Lorenzo You could try WalridgeMotors. They have them in SS as well as Aluminum. I bought a set from Mike and they were nice. Regards, CNN
Hobot MEMBER Joined Oct 2005 Messages 18,960 Apr 5, 2011 #6 Just trivia, nuts have a threads inside while bolts threads are outside, so guess what the fork and exhaust threaded fasteners should be called ; )
Just trivia, nuts have a threads inside while bolts threads are outside, so guess what the fork and exhaust threaded fasteners should be called ; )
DogT FULL MEMBER Joined Jan 2009 Messages 7,390 Apr 5, 2011 #7 What do you call it when it's threaded both on the inside and outside? Boltnut? Dave 69S
Hobot MEMBER Joined Oct 2005 Messages 18,960 Apr 5, 2011 #8 A reduction-reducing-reducer adapter fitting fastener? Hermaphroditic stud-mare fastener?
J jeffdavison MEMBER Joined Feb 2011 Messages 572 Apr 5, 2011 #9 http://en.wikipedia.org/wiki/Sex_bolt
Hobot MEMBER Joined Oct 2005 Messages 18,960 Apr 5, 2011 #10 hehe, a 'sex bolt', hehe i thought it'd have to relate to gender somehow.
DogT FULL MEMBER Joined Jan 2009 Messages 7,390 Apr 5, 2011 #11 It certainly couldn't be an un-sexed mule. Dave 69S
DogT FULL MEMBER Joined Jan 2009 Messages 7,390 Apr 5, 2011 #13 I knew someone would come up with something good. Good laugh. Thanks Chris. Dave