Single Mikuni Airbox Front

BrianG · Oct 8, 2017

Back in the day I had a Commando with a single Mikuni conversion, and I had found a replacement airbox front cover that was made, with one hole, to match the single carb conversion. I believe it may even have been made of stainless steel.

Does anyone know if this bit is still available, and from where?

Fast Eddie · Oct 9, 2017

BrianG said:
Back in the day I had a Commando with a single Mikuni conversion, and I had found a replacement airbox front cover that was made, with one hole, to match the single carb conversion. I believe it may even have been made of stainless steel.

Does anyone know if this bit is still available, and from where?

Something like this perhaps:

https://www.rgmnorton.co.uk/buy/command ... b_1668.htm

BrianG · Oct 9, 2017

That's the one! Thanks.

Stephen Hill · Oct 9, 2017

A more local source would be: http://www.customclassiccycleparts.com/
Here is a list of the stuff he makes, including the one hole plate for a Mikuni: http://www.customclassiccycleparts.com/list.html
Colin Kelly runs this business, and makes excellent reproduction parts.
You can contact him at custombikes@hotmail.com

Stephen Hill

850commando · Oct 10, 2017

so where to get a 58mm id intake boot to go from the 34vm mikuni to the single hole cover of the factory filter?

BrianG · Oct 10, 2017

850commando said:
so where to get a 58mm id intake boot to go from the 34vm mikuni to the single hole cover of the factory filter?

These ?

https://www.ebay.ca/sch/i.html?_odk...0&_nkw=2.25+to+1.75+silicone+reducer&_sacat=0

N0rt0nelectr@ · Oct 29, 2017

BrianG said:
Back in the day I had a Commando with a single Mikuni conversion, and I had found a replacement airbox front cover that was made, with one hole, to match the single carb conversion. I believe it may even have been made of stainless steel.

Does anyone know if this bit is still available, and from where?

I was just on RGM's web site and they list one. Check them out and let us know what yu think.
John in Texas

RoadScholar · Oct 29, 2017

Or, go to any auto parts store and purchase minimum length of 2, 1/4" ID Fuel Filler Neck hose. Make your hole in the backing plate slightly small than the hose OD and you're good to go.

Single Mikuni Airbox Front

Similar threads