1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

SINGLE CARB MANIFOLD FOR ATLAS/N15

Discussion in 'Wanted' started by jeff, May 19, 2019.

  1. jeff

    jeff

    Joined:
    May 19, 2019
    Wanted: single carb manifold for Atlas/N15
     
  2. oldbeezer

    oldbeezer VIP MEMBER

    Joined:
    Nov 2, 2017
  3. qside

    qside

    Joined:
    Sep 8, 2016
    What diameter hole are these? I think the N15 has a 28.5 mm opening? The commando was larger. I may have something sitting round in a box...
     
  4. jeff

    jeff

    Joined:
    May 19, 2019
    Hello, Thanks for the quick reply. I should have been more specific... I'm looking for a manifold that accepts the 2" stud spacing for an Amal. I've located them at RGM and Norvil but was hoping for a vintage one here in the States. Thanks! Jeff
     
  5. jeff

    jeff

    Joined:
    May 19, 2019
    [
    Commando manifold won't work. They have too much curve. The opening at the head should be the same for all 650ss/750, right? Jeff
     
  6. qside

    qside

    Joined:
    Sep 8, 2016
    my part has the casting number NM23356 if that helps...actually says 23356, I assumed NM prefix
    Measures 2" stud spacing and 28.5 mm bore.
     
    Last edited: May 20, 2019
  7. jeff

    jeff

    Joined:
    May 19, 2019
     
  8. qside

    qside

    Joined:
    Sep 8, 2016
    I saw that too but I think they are mistaken. The bore is too small for a commando.
     
  9. jeff

    jeff

    Joined:
    May 19, 2019
    The bore on my N15 (Atlas) is 28.5. Did you want to sell your manifold? Thanks, Jeff
     
  10. qside

    qside

    Joined:
    Sep 8, 2016
    PM me your phone number and i can text some pics first.
     
  11. Bernhard

    Bernhard

    Joined:
    Apr 20, 2011
    My ex-police Atlas came with single Amal and in the inlet ports were a split sleeve to reduce the bore dia. to enable the bike to run in top gear down to 15 mph without snatching. I sold these a long time ago.
     
  12. seattle##gs

    seattle##gs

    Joined:
    Oct 28, 2014
    I solved thr problem of how to intsll an air filter in The atlas. It will require some work but in the end you will have a K&N neatly tucked away. I can give you more info if you want.
     

Share This Page