Rear wheel spindle

baz · Jun 2, 2018

Is the rear wheel spindle on a drum brake commando 9/16 X 20 bscy (corse) where it screws into the stub axle? Cheers

L.A.B. · Jun 2, 2018

No, it's 18 tpi UNF.

https://andover-norton.co.uk/en/shop-details/15196/spindle-rear-wheel-18tpi-unf-

20 tpi is Dominator/Atlas.

baz · Jun 2, 2018

L.A.B. said:
No, it's 18 tpi UNF.

https://andover-norton.co.uk/en/shop-details/15196/spindle-rear-wheel-18tpi-unf-

20 tpi is Dominator/Atlas.

Ok cheers,I'm waiting for parts to arrive I have been sent a dommi/atlas spindle by the looks of it, I'm still waiting for a cush drive sprocket/stub axle to turn up so was unable to check properly
I assume that all cush drive commando stub axles use UNF threads then? Cheers

L.A.B. · Jun 2, 2018

baz said:
I assume that all cush drive commando stub axles use UNF threads then?

Yes, the earlier Commando bolt-up hubs also had the same (060289) spindle according to the parts list.

baz · Jun 2, 2018

L.A.B. said:
Yes, the earlier Commando bolt-up hubs also had the same (060289) spindle according to the parts list.

Ok thanks again

guest76 · Jun 2, 2018

Do bear in mind that although the threads are both UNF, the dummy axle is different between early Commando bolt up hub and later Commando cush hub.

Rear wheel spindle

baz

L.A.B.

Moderator

baz

L.A.B.

Moderator

baz

guest76

Guest