Rear master cylinder housing.

Status
Not open for further replies.
C

capehorner

Joined
Jul 29, 2012
Messages
34
Country flag
The metal housing that screws onto the rear master cylinder needs to be replaced, plunger also. Can't find the housing or drawing/part number anywhere. HELP. Bike is 75 Commando 850, electric start
 
L.A.B. Is that the flat mounting plate. I need the metal piece that screws into the master cylinder,, has two mounting holes, and the plunger/pushrod goes thru it.
 
Bought the whole kit n' kaboodle in stainless from M.A.P. U.S.A. The whole thing was rusted -siezed tighter than a N.C.on S. Heat and swearing and using the force young Luke.
 
capehorner said:
L.A.B. Is that the flat mounting plate. I need the metal piece that screws into the master cylinder,, has two mounting holes, and the plunger/pushrod goes thru it.
Click to expand...

From the RGM description: "MK3 COMMANDO REAR MASTER CYLINDER CAST ALLOY HOUSING/BRACKET" it would appear to be the alloy M/C housing, not a 'flat mounting plate'.
 
Status
Not open for further replies.

Similar threads

A
Mk3 rear master cylinder rubber boot
Replies
14
Views
572
Torontonian
Torontonian
Leonc
Left Hand Rear Master Cylinder
Replies
7
Views
734
Ron L
Ron L
possm
  • Locked
Rear Master-cylinder exploded view
Replies
2
Views
1,188
L.A.B.
L.A.B.
Chris
  • Locked
Rear master cylinder special
Replies
14
Views
2,572
SteveA
SteveA
EstuaryBoy
  • Locked
Mk3 13mm Rear Master Cylinder
Replies
0
Views
924
EstuaryBoy
EstuaryBoy
Back
Top