Quad ring for shifter shaft

I am looking for a proven part number for a quad ring to replace the o ring in the cover for the shifter shaft.
I have looked at previous threads but not found any good numbers. Most of the threads focus on lipped oil seals.
Here is one number I did find, but when I look it up in a manufacturer's table, the dimensions seem wrong: Q-4114

Thanks for any help you can provide.

Stephen Hill

Here in New Zealand we have a company called Seal Specialists, I took my O ring as a sample and the matched a square lipped ring to suit, thy also supplied one for the kick starter shaft, they have been in my bikes for the last 5+ years.
Al

Stephen Hill said:

Q-4114

Thanks for any help you can provide.

Stephen Hill

Click to expand...

Stephen,
That is the correct size for the gear shifter. If you want the size for the Kickstart lever I can give that too. Q-4213. Edit to the post to show correct Kickstart shaft size which should be Q-4214. Apologies for the wrong size. BTW Andover norton has their gasket kits with these quad rings. At least the last time I ordered when I needed to replenish my spare parts bin.
Cheers,
Thomas
CNN

Thanks Thomas,

I called my local o-ring supplier and they can bring in these rings. Should be a nice improvement over stock.

Stephen

CanukNortonNut said:

Stephen Hill said:

Q-4114

Thanks for any help you can provide.

Stephen Hill

Click to expand...

Stephen,
That is the correct size for the gear shifter. If you want the size for the Kickstart lever I can give that too. Q-4213. BTW Andover norton has their gasket kits with these quad rings. At least the last time I ordered when I needed to replenish my spare parts bin.
Cheers,
Thomas
CNN

Click to expand...

Correction on the Quad ring size... should be 4214 My apologies