PODtronic Help

Before I go ahead and install my new harness and all the other electrical stuff, I want to make sure it is correct. I believe I have the wires hooked up right for the podtronics. If I do where does the brown/blue wire from the zener diode go? do I just not hook it up, or does it get hooked up along with the brown/blue from the rectifier wires to the red wire from the podtronics unit? I have a new Warning light assimilator that is going on as well. I don't have to hook any wires up differently if all I am replacing is the rectifier and zener with the podtronics unit, Do I?

The red +VE ground wire from your harness connects to the red +VE wire on the box.
The brown/blue -VE wire from your harness connects to the black -VE wire on the box.

The brown/blue -VE wire that went to the zener is redundant;just tape it up so it contacts nothing.

Thanks. I guess I had the red and black switched on the image I posted.