- Joined
- Dec 28, 2009
- Messages
- 5,498
Just bought the nice shiny stainless domed one but need to know which wrench to put to it. Also the bigger one , the nut just before the timing cover. Don't want to have a wrench slip here. 
Oil pressure release valve nut sizes (2)
- Thread starter Torontonian
- Start date
- Status
- Joined
- Nov 20, 2004
- Messages
- 20,786
- Joined
- Dec 28, 2009
- Messages
- 5,498
My head is spinning. Ummmm. British confusion.
Torontonian said:Just bought the nice shiny stainless domed one but need to know which wrench to put to it. Also the bigger one , the nut just before the timing cover. Don't want to have a wrench slip here.
The wrench/spanner that fits is the correct one to use.
- Joined
- Dec 28, 2009
- Messages
- 5,498
Measured and Chart referenced. The Dome nut shows 1/2 W ; 9/16 BSF. The larger main body one shows 5/8 W ; 11/16 BSF. I have neither of these med/large wrenches. 23 and 28 mm seem very close.
- Joined
- Jan 2, 2013
- Messages
- 4,256
Torontonian said:
28 mm works for me on the relief valve body (the larger) as I do not have a 5/8W either.
Slick
- Status
