N15cs Chain case gasket

Gilesy

Gilesy

VIP MEMBER
Joined
Aug 27, 2017
Messages
192
Country flag
Is there a gasket between the inner chain case and the crank case? Can't find one listed anywhere. I can make one but should there actually be one there?
Thanks as always.
Giles
 
There is one on an Atlas. I would think there should be one on any of the hybrids.

I made mine from 1/32" synthetic cork .... no leaks.

Slick
 
Ha! ring stuck on with indeterminate sticky stuff. 2 gaskets it is.
Thank you
 
Gilesy said:
Is there a gasket between the inner chain case and the crank case? Can't find one listed anywhere. I can make one but should there actually be one there?
Thanks as always.
Giles
Click to expand...
Hi Giles, I pulled my original chain case off to find only sealant (wellseal) on the steel ring spacer, if you use gaskets take great care to space out centre support stud with a washer the thickness of 2 gaskets, otherwise inner chaincase may distort. Roddy
 
I do not believe the N15cs has a center foot peg support to worry about, only the P11. The N15cs chaincase gasket is 02.5037. Andover Norton has them.
 
You must log in or register to reply here.
Back
Top