Molnar head/cylinder test bolt fit

Joined
Nov 26, 2009
Messages
3,233
Country flag
Anyone have a set of Molnar cylinders on hand but not yet installed? I'm making up some bolts and want to check the fit. I have some Molnar bolts on hand to match but want to be sure. I need someone to spin in a sample by hand and give me some feed back. US shipping prefered.

The goal is similar to the bolts for stock cylinders shown below. With waisted shanks like rod bolts so they stretch and rebound with changing temperature/alum head expansion instead of loosening.

Molnar head/cylinder test bolt fit
 
Last edited:
Anyone have a set of Molnar cylinders on hand but not yet installed? I'm making up some bolts and want to check the fit. I have some Molnar bolts on hand to match but want to be sure. I need someone to spin in a sample by hand and give me some feed back. US shipping prefered.

The goal is similar to the bolts for stock cylinders shown below. With waisted shanks like rod bolts so they stretch and rebound with changing temperature/alum head expansion instead of loosening.

Molnar head/cylinder test bolt fit
Hi Jim,
I have Andy's aluminum, Nikasil lined cylinders. I'm in VA.
 
Back
Top