MKII Arrives Images ..

Status
Not open for further replies.
Joined
Jun 13, 2010
Messages
55
I think I may have managed to get the hang of posting pics :D thanks to the tech info section ,, Cheers Paul

MKII Arrives Images ..


MKII Arrives Images ..
 
Joined
Feb 7, 2010
Messages
4,176
Country flag
That's a mighty clean '74. Has it been redone or was it stored in some sort of preservative?

Never mind. read in your other thread that it's mostly original. Someone has taken very good care of it since it was new.
 
Joined
Oct 31, 2009
Messages
5,193
Country flag
I think that if you really appraciated your Norton, It would be on the Persian rug, not next to it.

Another Beauty!
 
Joined
Jul 24, 2003
Messages
368
Holy Crap! You have the male accessory plug also. Noticed a part of wiring harness sticking out behind the oil tank. Don't forget to turn the manual oil valve on. VERY NICE BIKE!
 

grandpaul

VIP MEMBER
Joined
Jan 15, 2008
Messages
12,505
Country flag
Gorgeous bike, but i'd install a 1/4 turn valve on the sump drain before I'd ever have one on the main oil line!
 

rvich

VIP MEMBER
Joined
Jul 25, 2009
Messages
3,177
Country flag
So that's what they look like when they have been properly stored!

MKII Arrives Images ..


Yikes! Gives new meaning to the nature vs nurture argument.
 
Joined
Oct 31, 2009
Messages
5,193
Country flag
rvich said:
So that's what they look like when they have been properly stored!

MKII Arrives Images ..


Yikes! Gives new meaning to the nature vs nurture argument.
Where's yer persian rug?
 
Joined
Jul 3, 2009
Messages
836
Country flag
Hi Paul, Lovely bike congratulations, sugest you get rid of the tap in the oil line before you forget to turn it on!!
may catch you on a ride someday. Al
 
Joined
Jun 13, 2010
Messages
55
Thanks to you all for the kind compliments on condition ,, Yes ...the oil line tap is definately going ,, I am just to forgetful to keep it :? ,, I fitted one of those little anti wet sump in-line valves from Steadfast Cycles on my R3 and have had no problems, ( fit and forget ) , so I will purchase another one for the Norton ,,

Can some-one tell me the numbers on how to check for an Italian frame ,,

Thanks ,,
Cheers Paul
 
Joined
Jun 14, 2007
Messages
1,739
Country flag
nznorton said:
I fitted one of those little anti wet sump in-line valves from Steadfast Cycles on my R3 and have had no problems, ( fit and forget ) , so I will purchase another one for the Norton

I sense another lecture coming....

Seriously, I have one of those (not from Steadfast, but same idea) sitting on a shelf in my back room. Many people (including me) think they're not a great idea....
 
Status
Not open for further replies.
Top