MK3 kickstarter and rearsets

Guys, will a Mark3 kickstarter work on a Mark2 with rearsets? I have read that the triumph folding one won't work but what about the MKIII? My MKII one nips the muffler and I'm tired of it. Thanks!

Yep!

Yes the Mk111 kick start works ok with read sets , I've tried to upload some photos, but I'm can't get it to work on my Ithingy.
Chili

Ron L said:

Yep!

Click to expand...

Hi Ron,

I also mounted on the rear of my 750 the ES conical wheel and the disc brakes.
I have placed the rear master cylinder as shown in the picture.

Please,
could you post some photos where I can see how the rear brake pedal works and where you placed the rear master cylinder and how it works?

Thanks.

Piero

Please,
could you post some photos where I can see how the rear brake pedal works and where you placed the rear master cylinder and how it works?

Thanks.

Piero

Click to expand...

Piero,
Yours is a very elegant solution. I did not have any space left in the battery tray area due to mounting the 3-phase Podtronics and a 4-circuit fuse panel there.

Do you have the toolpouch in your side cover? It seems that the master cylinder would be very close to the side cover tool pocket.

I made a custom polished aluminum bracket to mount the master to the rear frame plate.

(Apologies for the thread hijack)

Hi
Another attempt at inserting some photos.
Rear Sets on a mk111 850 75,ES roadster



excuse the finger



now the clearance



I hope this works and helps.
Chili

OK what am I doing wrong, HELP!!

Went to utube for instructions now done!