Matchless
VIP MEMBER
- Joined
- Dec 23, 2010
- Messages
- 1,107
I am currently building a BSA OIF A65 to which I'm fitting a set of T140 forks. This is to enable me to fit a disc brake rather than the comical hub effort. Do any of you chaps know of a modern floating disc, 12 to 13 inches in diameter, which is close enough in offset & centre bore size for me to modify for the T140 hub. I'm too tight to fork out for a Norman Hyde disc. I'll be adding a Yamaha Sumitomo Blue Spot caliper to the mix, & a Nissin 1/2" master cylinder from a Honda CBR 125.
Martyn.
Martyn.