madass140
VIP MEMBER
- Joined
- Nov 6, 2011
- Messages
- 2,126
This is more of a Notification only than a thread for discussion , although of course its
a post and people will respond but there is no need to respond negatively ABOUT THIS POST, Its for information ONLY.
(1) Quite some time ago I changed my O'ring supplier for the adjuster as the original O'rings
had to much interference . O'rings from different suppliers were not the same , only .001" difference in cross section made a big difference in the force needed to turn the adjuster.
(2) Due to the "enormous" amount of owners having an issue with the grub screw
in the adjuster. I have made some changes to the adjuster which will now eliminate this issue , 100's will be relieved. I wont elaborate on the mod only to say its no longer
an issue
a post and people will respond but there is no need to respond negatively ABOUT THIS POST, Its for information ONLY.
(1) Quite some time ago I changed my O'ring supplier for the adjuster as the original O'rings
had to much interference . O'rings from different suppliers were not the same , only .001" difference in cross section made a big difference in the force needed to turn the adjuster.
(2) Due to the "enormous" amount of owners having an issue with the grub screw
in the adjuster. I have made some changes to the adjuster which will now eliminate this issue , 100's will be relieved. I wont elaborate on the mod only to say its no longer
an issue