Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
Just checked the rotor clearance on my Matt's build #134 - no discussion between us on this issue and I have never checked/adjusted this.Checked the rotor clearance, starting at 20 thou - no way this will fit in. Continued to reduce feeler gauge size.At 14 thou I could get it in and around about 2/3rds of the way around.At 10 thou it will go all the way around with one spot being a bit "tight" - so say 9 thou there.Supports my long held belief that 10 thou is adequate, but, to each their own I, unlike some, stay within the recommended redline. You Nigel?I have pushed it to 7500 in top a few times though - shhhh!! (no tracks within 500km)
Just checked the rotor clearance on my Matt's build #134 - no discussion between us on this issue and I have never checked/adjusted this.
Checked the rotor clearance, starting at 20 thou - no way this will fit in. Continued to reduce feeler gauge size.
At 14 thou I could get it in and around about 2/3rds of the way around.
At 10 thou it will go all the way around with one spot being a bit "tight" - so say 9 thou there.
Supports my long held belief that 10 thou is adequate, but, to each their own
I, unlike some, stay within the recommended redline. You Nigel?
I have pushed it to 7500 in top a few times though - shhhh!! (no tracks within 500km)