Kicker return spring instal procedure

Before I end up frustrated or missing teeth etc. I would appreciate a tutorial in the art of replacing the kicker return spring on my 750 S . Everything is in place in the outer box just need to put the spring in place. I'm sure you guys (and gals) will have a" make it easier "procedure.

Thanks in advance,
Tom

P.S. Happy and safe holidays! T&Q

Pry the spring on with a screw driver to line up inside of the spring with the hole. Pry it on prying up on one side and make sure the end sets well into the hole(important).
The hook (outside end)is not as hard to put in place as one would think. I use a small channel lock or a small visegrip will work but the channel lock gives best control to release once in place.

good luck

Thanks,

I was overthinking it.


Tom

Be careful not to scratch the seal secion of the kickers shaft.

RS