instrument lights

YING · Feb 2, 2012

Any tips on how to make the sockets for the instrument lights stay in place.74 Roadster with plastic bulb holders.
Is there a conversion for a metal plug or am I missing something? The tabs are all there but if you blow on them
they fall out.Any help would be appreciated.
YING

303 fmj · Feb 2, 2012

if the small tabs on the holders are worn or missing---I have wrapped a bit of rubber tape around the holder and pushed it back into the hole---best to just replace the holders and get on with the next fix. You can always use epoxy or JB weld and make a more permanent repair---but ???

JimP · Feb 2, 2012

Interestingly, mine fit very loose and I have a brand new Andover Norton wiring harness. Maybe there's a manufacturing tolerance issue.

xbacksideslider · Feb 2, 2012

My '73 has metal holders and even after I bend them outward for a tighter fit, they seem to bend back in when I re-insert them and then sometimes I have to do it again. Steel isn't springy enough.

travelerjerry · Feb 2, 2012

Duct tape. Naw, I tried that with one of the plastic holders I have. Kept coming off and I fashion 2 metal straps and a machine screw & nut and used the speedo cable as a support and clamped the bulb holder. Hasn't let loose.I'd post a picture but it may look like that I'm a backyard mechanic.

Get a metal type bulb holder off of Evil Bay.

DogT · Feb 2, 2012

If you're talking about these bulb holders, mine are metal and I remember they used to be available at the auto store, but maybe not now?

Dave
69S

YING · Feb 3, 2012

Dave,
Do those metal holders stay put ?

Matt Spencer · Feb 3, 2012

Being Flucas , you can rob them out of old Hillman Hunters , Minis , and Cortinas . Pre 67 ish for the metal ones .

Millions made of the plastic , most never removed once . Can be an art leaning over bacward , gead in the boot droppings arm behind youre back into the instrument back through labrynth of braces & cables .
A worm / Twist squirm loose before knocking out free saves destroying them .

Plastic ones Id dose in Armourall before use , to aid elasticity .
Metal ones date to Rover 75s , Before Rover 90s .So Land Rovers 7 RangeRovers , if theres a ' car field ' handy .

Darn sight easier to take the dash / instruments out. And flog all the bolts screws fittings while youre at it .
Rubber grommets for wires / cables through bulkheads etc . Dunno If Triumph Herald front Discs 'd come in handy too . :mrgreen:

travelerjerry · Feb 3, 2012

Ok Bill, see you removed your post. Since I have spare time recovering from heart surgery for almost 3 weeks now. Here is what I did to keep the bulb holder in. Really can't notice it unless looking below the clock. Get your belly brace on. :lol:

mikegray660 · Feb 3, 2012

travelerjerry said:
Ok Bill, see you removed your post. Since I have spare time recovering from heart surgery for almost 3 weeks now. Here is what I did to keep the bulb holder in. Really can't notice it unless looking below the clock. Get your belly brace on. :lol:

don't think Bill removed his post.....

DogT · Feb 3, 2012

YING said:
Dave,
Do those metal holders stay put ?

Yes

bill · Feb 3, 2012

I was not the one that removed it, I think the only ones that can do that is moderators, the only thing we can do is edit our own post's

mikegray660 · Feb 3, 2012

bill said:
I was not the one that removed it, I think the only ones that can do that is moderators, the only thing we can do is edit our own post's

Did you find a quarter under your pillow left by the forum fairy for your removed post? :shock: :mrgreen:

bill · Feb 3, 2012

I would either remove the nail or bend it over so it cant fall out and give you a flat tire :lol: I have seen worse from better people. oh and hope you heal fast.

travelerjerry said:
Get your belly brace on. :lol:

bill · Feb 3, 2012

no such luck. looks like even the forum fairy's are having hard times in this down economy. :roll:

mikegray660 said:
Did you find a quarter under your pillow left by the forum fairy for your removed post? :shock: :mrgreen:

travelerjerry · Feb 3, 2012

bill said:
I would either remove the nail or bend it over so it cant fall out and give you a flat tire :lol: I have seen worse from better people. oh and hope you heal fast.

Yea, I forgot about doing that after I fashioned that in. Have to get the needle nose pliers.

instrument lights

YING

Pittsboro,NC

303 fmj

JimP

xbacksideslider

travelerjerry

DogT

YING

Pittsboro,NC

Matt Spencer

travelerjerry

mikegray660

DogT

bill

mikegray660

bill

bill

travelerjerry

Similar threads