hobot said:Do you mean the actual sheet metal stamp outs or just need new felt seal?
If just the seal pull old out wet and work in new one. Over my head to replace the discs other than tricky tack welding with a jig others may have advice on.
geo46er said:Hi Piero,
You can get them out any number of ways (some prettier than others).
The last time I installed a pair I drilled 4 small holes (3/16 inch) around the radius of the groove where they press together then I spot welded them with my mig welder, worked perfect. I once tried to epoxy them together, that did not work perfect.
GB