Shelby-Right
VIP MEMBER
- Joined
- Jan 28, 2022
- Messages
- 717
My BSA B33 leaks oil Badly from the primary cover .
Taking the primary cover off again to really find my oil leak , I'm lucky to have a english surface plate that's about 4 ½ feet square so after trying my new puller for the hub adapter, the split part , it worked fantastic , I found the rear part of the cover had .020" gap at the bottom , so I had to get into it with a decent file then back onto my surface plate , glued on sand paper , cover now flat . Now onto the sliding plate , which has a neoprene seal but the whole thing needs attention. Cheers
Last edited: