Hammer drive rivets

Status
Not open for further replies.

baz

VIP MEMBER
Joined
May 26, 2010
Messages
7,140
Country flag
Could someone tell what size hammer rivets for a commando vin plate please?
IE number 2 number 4 etc many thanks
 
Can’t tell you that Baz but I can tell you that RGM has ‘em.
Cheers for that Eddie
I went on the website ordered the rivets and one or two other bits that I decided I needed !!
I shouldn't be allowed a computer or a bank account!!
Cheers
 
Cheers for that Eddie
I went on the website ordered the rivets and one or two other bits that I decided I needed !!
I shouldn't be allowed a computer or a bank account!!
Cheers

You don’t have to explain that to me Baz.

I’ve got the self control of a crack head...
 
I have a friend who likes to say " Good thing some poor guy doesn't own that motorcycle".
 
When fitting these rivets I normally drill a shallow depression in the end of a long bolt and use that as a drift, it stops the drift drifting, if you get my drift!
 
I got mine from Mick H quite some time ago, AN sourced. They seem to me to be larger
than the original but I forget what they looked like in fact. No problem with them filling
the holes one of which was quite egged out. It is a bit difficult to get the original plate
to sit flat whilst driving the rivets. Hold it down tight with tape and drive carefully.
 
Status
Not open for further replies.
Back
Top