1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Grimeca Caliper and EBC HH Pads - Fit Issues

Discussion in 'Norton Commando Motorcycles (Classic)' started by Dellis, Mar 31, 2019.

  1. Dellis

    Dellis VIP MEMBER

    Joined:
    Jul 22, 2018
    i fitted a pair of EBC HH pads to my Grimeca caliper a little while ago and have had a couple of issues with them, firstly they overhung the outer edge of the disc by a couple of mm, the Ferodo pads I replaced didn’t overhang, but I milled the excess off the EBC pads which sorted that. The second issue it that they are a slightly loose fit and at low speed the the inboard pad picks up on the disc and then releases, only very slightly but at low speed you can hear the tick tick as the pad picks up and releases which is somewhat irritating. I have used EBC pads on plenty of bikes over the years and have always found them to be excellent which is why I thought I’d try a pair on the Commando.

    Pistons are perfectly free.

    Anyway it’s back to Ferodo for me but I just wondered if anyone else had experienced similar problems?

    Dave
     

Share This Page